AGCO LT85 Tractor 94 hp Overview, Features, and Performance
AGCO LT85 Tractor 94 HP
The AGCO LT85 tractor delivers 94 horsepower and is designed to handle a range of farming tasks. You can count on reliable performance, durable build quality, and solid features for different uses.
Production & Identification
The AGCO LT85 tractor is part of AGCO’s line of utility tractors in the 80-100 horsepower range. Production for this model began in the early 2000s, with 2003 being a notable year based on available data.
The LT85 is typically available in both two-wheel drive and four-wheel drive configurations, making it suitable for a variety of field conditions. You will find the 94 hp engine rated for reliable performance, especially for jobs like planting, tillage, and transport work.
The AGCO LT85 falls within AGCO’s broader lineup that includes other brands like Massey Ferguson, consistent with their practice of offering tractors under several nameplates. Key identification features include its distinctive styling, grill, and color scheme, which match other AGCO models from the same period.
Tractor models, drive types, and horsepower ratings are often marked on the side panel, making it easy for you to identify the LT85 in a lineup.
Manufacturer / Brand
AGCO Corporation is an American agricultural equipment manufacturer that owns and produces several well-known brands, including AGCO Allis, Deutz-Allis, Massey Ferguson, Fendt, and Valtra. The AGCO name on the LT85 model indicates it was marketed under AGCO’s own branding, rather than one of its acquired brands.
When you use the LT85, you are benefiting from AGCO’s history of acquiring and managing several respected farm machinery companies. The AGCO brand is known for reliability and for developing machines that meet the requirements of modern farming.
AGCO’s global reach and partnerships with other brands also influence the design standards and technology available in the LT85 series.
Model Number / Series
The “LT” in LT85 stands for “LandTractor,” which was a series designed to fill the needs of medium-sized farms needing versatility and power. The 85 in LT85 refers to the tractor’s nominal model number within this series, which roughly aligns with its engine horsepower rating, although the actual engine output is higher at 94 hp.
If you compare the LT85 with others in the LT series, such as the LT75 or LT95, you will see different engine sizes and features. The LT series, including the LT85, often shares components with other AGCO brand tractors, like some models under Massey Ferguson or Deutz-Allis.
This can help with parts compatibility and servicing over the tractor’s life.
Factory of Manufacture
The AGCO LT85 was manufactured in AGCO’s factory in Argentina. AGCO invested in modern facilities to support tractor production in South America, and the LT85 benefited from these upgrades.
Manufacturing in Argentina made it possible for AGCO to serve both local markets in South America and international markets, especially where mid-range tractors were in demand. This location enabled AGCO to leverage local supply chains and skilled labor while maintaining its quality control standards.
It also allowed the company to adapt models to meet the needs of customers in different regions, sometimes offering distinct versions with region-specific features or adjustments.
Years Produced
Production for the AGCO LT85 started in the early 2000s, with 2003 frequently mentioned as a reference year in sales listings and serial number records. While exact end-of-production dates can vary by market, the LT85 was produced for several years throughout the early 2000s.
If you are looking for a used model, most available tractors will fall between about 2002 to 2005. The LT series, including the LT85, was replaced by newer models as AGCO updated its product lines.
However, parts and after-sales support often continue for years after production stops.
Original List Price (Launch Year)
When first released, the AGCO LT85 had an original list price in the range of $35,000, depending on features, drive type, and setup. This price positioned the LT85 competitively within its segment, offering substantial power and features at a reasonable cost for medium and large farms.
Prices could vary if you selected optional equipment, such as front-end loaders, cab enclosures, or extra hydraulic outlets. As with many tractors from this era, manufacturer incentives or dealer discounts sometimes affected the final sale price.
Over the years, the LT85 has held its value well in the used market, especially for low-hour units and models with full records.
Serial-Number Location
You can find the serial number plate for the AGCO LT85 in a common location typical for tractors of this size. The serial number is usually mounted on the right side of the tractor frame, below the engine or near the front axle.
In some cases, it may be found underneath the left hood panel, depending on factory practices and year of manufacture. Locating the serial number is important for ordering parts, confirming the manufacturing year, and checking for recalls or service campaigns.
Always cross-check the serial number with AGCO’s official records or your dealer to ensure you have the correct information for service or resale.
AGCO LT85 Tractor 94 HP: Quick Reference Table
| Topic | Details |
|---|---|
| Production & Identification | Utility tractor, part of LandTractor series, 94 hp, available in 2WD/4WD, distinct AGCO design |
| Manufacturer / Brand | AGCO Corporation; related brands include Fendt, Valtra, Massey Ferguson, Deutz-Allis |
| Model Number / Series | LT85 (“LandTractor” series); nominal 85, actual 94 hp; shares parts with other AGCO models |
| Factory of Manufacture | Argentina; served local and global markets, using modern production standards |
| Years Produced | Produced mainly in early 2000s; 2003 is a key year; typical production run from 2002-2005 |
| Original List Price (Launch Year) | ~$35,000, with variation based on equipment and options |
| Serial-Number Location | Right side of frame below engine, near front axle, or under left hood panel |
Engine Specifications
The AGCO LT85 tractor uses a well-known Cummins diesel engine designed for durability and efficient field performance. Detailed specifications of the engine cover aspects such as model, fuel type, output, and cooling.
| Specification | Details |
|---|---|
| Engine Make & Model | Cummins 4BT3.9T |
| Fuel Type & Emissions Tier | Diesel, Turbocharged |
| Cylinders / Displacement | 4-cylinders, 3.9 liters (239 cu in) |
| Rated Horsepower | 94 hp (gross), ~85 hp (PTO/tested) |
| Peak Torque | ~340 Nm at 1500 rpm (varies by tune) |
| Compression Ratio | 17.5:1 |
| Cooling System | Liquid-cooled, 12–14 L (3.2–3.7 gal) capacity |
Engine Make & Model
You get a Cummins 4BT3.9T engine in the AGCO LT85. This is a four-cylinder, turbocharged diesel engine known for its robust construction.
The Cummins brand is trusted worldwide for reliable engines in agricultural machinery. This model is part of the Cummins B series family.
That means it shares many components with other engines in the same class, making parts easier to find and keeping maintenance simple. Engine identification is usually stamped on the block—a helpful detail when ordering replacements.
Fuel Type & Emissions Tier
The engine runs on diesel fuel, which delivers strong pulling power and better fuel economy compared to gasoline engines. The 4BT3.9T is turbocharged, allowing more air to enter the combustion chamber and improving overall efficiency.
Emission controls for this model are minimal, as it was produced before the latest tiered emissions requirements. This means you won’t find advanced after-treatment systems or diesel particulate filters.
The emissions level aligns most closely with Tier 1 standards.
Cylinders / Displacement
You’ll find four inline cylinders, each liquid-cooled to maintain performance in hot conditions or under long hours of use. The total displacement is 3.9 liters, or 239 cubic inches.
This displacement strikes a balance between power output and fuel efficiency. The four-cylinder configuration also helps reduce vibration and keeps maintenance tasks straightforward.
The cylinder bore measures 102 mm (4.016 in), and the stroke is 120 mm (4.724 in), ensuring a long engine life and steady torque.
Rated Horsepower (Gross & Net)
The engine provides a gross horsepower rating of 94 hp. This is engine power before any losses from auxiliary components or PTO attachments.
The tested (PTO) horsepower typically comes in around 85 hp, measured at the power take-off shaft. This power range supports a wide variety of implements and jobs.
The difference between gross and net horsepower is due to real-world friction and accessory losses, which is normal for this tractor class.
Peak Torque (Nm @ rpm)
Peak torque for this engine is about 340 Newton-meters, delivered at approximately 1500 rpm. This steady torque at lower rpm is useful when pulling heavy loads or running equipment that demands constant force.
You benefit from strong low-end power, which makes the tractor capable of handling difficult fieldwork and heavier tasks. The engine’s torque curve is relatively flat, so you won’t lose much power if engine speed drops a bit under load.
Compression Ratio
The compression ratio for the Cummins 4BT3.9T is 17.5:1. This high-ratio design boosts the power of the diesel combustion cycle and improves fuel use.
A higher compression ratio helps with efficient fuel burning and reliable cold starts. For the operator, this means fewer starting problems in colder weather and a lower risk of engine knock.
Cooling System & Capacity
The engine is liquid-cooled, using a radiator and coolant mix to control engine temperatures. The cooling system keeps engine parts protected from overheating, especially in hot weather or during long shifts.
You need 12 to 14 liters (about 3.2 to 3.7 U.S. gallons) of coolant to fill the system. Regular checks and maintenance of the radiator, hoses, and coolant help keep the engine running smoothly under stress.
| Key Feature | Details (AGCO LT85 / Cummins 4BT3.9T) |
|---|---|
| Engine Make | Cummins |
| Engine Model | 4BT3.9T (Turbocharged) |
| Fuel Type | Diesel |
| Emissions Tier | Pre-Tier 2 / closest to Tier 1 |
| Cylinder Count | 4 (inline) |
| Displacement | 3.9 L (239 cu in) |
| Horsepower | 94 hp gross / 85 hp PTO |
| Peak Torque | ~340 Nm @ 1500 rpm |
| Compression Ratio | 17.5:1 |
| Cooling System | Liquid-cooled, 12–14 L capacity |
Power Take-Off (PTO)
The AGCO LT85 tractor is equipped with a well-designed PTO system. You benefit from strong output and versatile options, making it easier to use many types of implements and attachments.
Claimed PTO Horsepower
The AGCO LT85 delivers about 80 PTO horsepower from its 94 engine horsepower. This means you have reliable power for running implements like rotary cutters, balers, and a PTO generator.
The ability to get so much usable horsepower at the shaft helps you handle many tasks without overworking the engine. The “claimed PTO horsepower” lets you know how much power actually reaches your attachments.
The difference between engine HP and PTO HP comes from energy lost in the drivetrain. On the AGCO LT85, the drop is average and ensures steady delivery for jobs needing continuous PTO output.
With 80 PTO HP, you get enough power for most 540 PTO-driven equipment. This is especially useful for hay tools, mowers, augers, and various PTO-powered sprayers.
For generators, especially those needing steady speed and torque, the available PTO horsepower means reliable operation even under load.
PTO Type (Independent / Live / Economy)
Your AGCO LT85 features an independent rear PTO. This PTO type means you can operate the PTO shaft without stopping the tractor or disengaging the transmission.
The independent setup helps you control your attachments easily and makes the tractor safer and more convenient to use. With independent PTO, you just use a simple lever or switch—no need for complicated clutch work or stopping.
This is important when you want to start or stop implements, such as a PTO generator or mower, while keeping the tractor rolling. The independent design is better for most modern implements and is now seen as a standard feature on tractors in this class.
Economy PTO isn’t standard on this model; you typically get normal operating speeds only. This means full engine RPM is required to reach rated PTO RPM.
Live PTO and economy PTO are not featured, so you rely on direct engagement for consistent performance.
PTO Speeds (540 / 1 000 rpm)
The AGCO LT85 provides a 540-rpm rear PTO as standard. This is the most common speed and matches the needs of many North American implements.
If you have a 540 PTO generator, most mowers, tedders, or balers, you’ll find this setup works out of the box—no adapters or extra parts are needed. Some variants of the LT85 may include a 1,000-rpm PTO option, but most commonly, these tractors are fitted with 540 rpm.
This suits small and mid-sized implements designed for lower PTO speeds, making it suitable for typical field and yard work. If you use high-demand implements, check your model for the available PTO speed.
Changing PTO speed modes (if available) usually requires shifting a lever or selector. You must match the implement to the correct PTO speed to avoid equipment damage.
Standard 540 rpm operation provides steady power output for most day-to-day uses.
| Feature | Details |
|---|---|
| Claimed PTO Horsepower | 80 HP (from 94 engine HP), suitable for running various PTO-driven implements |
| PTO Type | Independent, rear PTO; allows engagement without stopping tractor |
| PTO Engagement | Simple lever/switch; no need for clutch or stopping transmission |
| Economy/Live PTO | Not standard; operates at full engine RPM only |
| Standard PTO Speed | 540 rpm |
| Optional PTO Speed | Some units may offer 1,000 rpm |
| PTO Uses | Rotary mowers, balers, PTO generators, tedders, augers, sprayers |
| PTO Convenience | Usable with most North American and standard 540 PTO implements |
Transmission & Drivetrain
The AGCO LT85 uses a strong and easy-to-operate transmission. You get a dependable drive system that handles field work and transport tasks smoothly.
Transmission Type (Syncro, Powershift, CVT, HST)
The AGCO LT85 comes with a two-speed powershift transmission. This means you can shift between two speeds within each gear range without needing to stop or use the clutch fully.
The powershift function makes it easier to adapt between different loads or speeds. This tractor also has a mechanical shuttle.
The shuttle lets you change driving direction quickly between forward and reverse. This is very useful for loader work or any task where you need to change direction often.
The wet disc clutch improves reliability because it stays cool and lasts longer. You do not have to worry about quick wear or heat-related problems with the clutch.
Number of Gears / Ranges
You get 24 forward gears and 24 reverse gears with the LT85. The combination comes from a main gearbox plus the two-speed powershift.
There are several ranges, letting you pick the speed that best fits the job. The gear range setup helps you keep the right pace for everything from planting to transport.
You get precise control, so it’s easier to keep steady in the field. The mechanical shuttle adds even more control when working with attachments or in tight spaces.
Here is a table showing the gear and range layout:
| Feature | Details |
|---|---|
| Gear Shifting | Two-speed powershift |
| Number of Forward Gears | 24 |
| Number of Reverse Gears | 24 |
| Type of Shuttle | Mechanical Shuttle |
Top Transport Speed
The AGCO LT85 is designed for both field work and road travel. The top transport speed depends on the tires and final drive ratio, but it usually reaches up to around 25 mph (40 km/h).
You can safely move between fields or travel on roads without slowing down work. The balanced gearing and transmission help keep the ride smooth even at higher speeds.
Safety features let you maintain control while traveling at top speed. The braking system is made to match the tractor’s size and weight for quick, stable stops when needed.
Drive (2WD / 4WD / AWD)
The LT85 models are available as either 2-wheel drive (2WD) or 4-wheel drive (4WD). Most buyers choose 4WD for better traction, especially in muddy or sloped conditions.
The 4WD system lets you work in all seasons. Wet ground, loose soil, or clay is less of a problem when all wheels drive together.
Tight turns or heavy pulls are easier with four powered wheels. If you only need the tractor for light tasks or flat, dry fields, the 2WD setup costs less and is easy to maintain.
This table compares the drive options:
| Drive Option | Key Advantages | Best For |
|---|---|---|
| 2WD | Lower cost, easier servicing | Dry, flat fields |
| 4WD | Better traction and control in tough conditions | Wet fields, slopes, heavy loads |
Differential-Lock & Final Drives
The differential-lock is standard on the AGCO LT85. When engaged, it forces both rear wheels to turn at the same speed.
This adds extra traction in tough spots like mud or when pulling heavy implements. Final drives use robust gearing to handle the high torque and long-term use.
The wet disc brakes and strong final drive parts make sure the power from the engine gets to the ground without slipping or breaking. You control the differential-lock with a simple lever, which you can use when needed for extra grip.
The design makes it easy to use and dependable for all types of work.
The table below lists main drivetrain features:
| Feature | Description |
|---|---|
| Differential-Lock | Manual, standard, for increased traction |
| Final Drive | Heavy-duty gearing for high torque and durability |
| Clutch Type | Wet disc, long life and stable operation |
| Brake Type | Wet disc brakes, reliable performance |
Steering & Brakes
The AGCO LT85 tractor uses a power steering system for easier handling. Its braking system uses hydraulic wet disc brakes to provide reliable stopping power, even during tough work.
| Feature | Description |
|---|---|
| Steering System | Power Steering (Hydrostatic Assist) |
| Turning Radius (with brakes) | Tight, precise turning for field maneuverability |
| Service Brakes | Hydraulic Wet Disc Brakes |
| Parking Brake Type | Hand-operated/mechanical locking |
Steering System (Hydrostatic / Power-Assisted / Mechanical)
The AGCO LT85 features a power steering system, supported by hydraulic pressure. This means you do not have to use much force to turn the wheel, even when carrying heavy loads or making sharp turns.
The hydraulic assist system allows for smooth steering on rough, uneven ground. You can steer easily at both low and high speeds.
This setup reduces fatigue, so you can work longer without feeling worn out. The design helps you keep good control of the tractor, making it safer and more comfortable to drive.
Power steering does not require manual effort like older mechanical systems. This technology is especially useful if you use attachments or frequently change directions in the field.
Turning Radius (with brakes)
The turning radius of the AGCO LT85 is quite tight for its size, especially when you use the brakes to help pivot. By applying the brake on one side, you shorten the turning circle, letting you maneuver easily at field ends or in narrow spaces.
This feature is useful for row crops and confined areas. The combination of power steering and brake-assisted turning gives you more precise handling.
You do not have to stop and back up as often, which increases your working speed. You can complete headland turns faster and keep your rows straight.
If you frequently operate in small plots or near obstacles, this turning ability gives you more control, helping you stay productive.
Service Brakes (Wet Disc, Dry Drum, etc.)
The AGCO LT85 is equipped with hydraulic wet disc brakes. These brakes use oil to keep the discs lubricated and cool.
Wet disc brakes last longer than dry systems, as the oil reduces wear and keeps out dust and dirt. You get strong, consistent stopping power, even after many hours of use.
The hydraulic action means the brakes need only light pedal pressure. This helps prevent fatigue and keeps your reactions quick if you need to stop suddenly.
Wet disc brakes also require less frequent maintenance than dry drum brakes because they are sealed from outside contamination. This makes them especially well-suited for farms with dusty or muddy conditions.
Parking Brake Type
The AGCO LT85 uses a mechanical parking brake, usually operated by a hand lever in the cab. This brake locks the wheels in place so the tractor does not move when parked, even on a slope.
You engage the parking brake by pulling the lever, which activates a mechanical lock within the braking system. This setup is simple, reliable, and easy to check visually.
It is important to use the parking brake whenever you stop and leave the tractor, as it helps prevent accidents. The design is sturdy for long-term use, with little risk of accidental release.
Cab & Operator Station
The AGCO LT85 tractor offers options for both open and enclosed operator environments, focusing on your comfort and safety. Details like climate control, seat design, and noise levels are important for your daily use.
ROPS / Cab Option
The AGCO LT85 comes with a standard two-post ROPS (Roll-Over Protective Structure) for enhanced safety. This option is essential if you prefer operating in an open station, as it helps protect you in the event of a rollover.
If you want more protection and added comfort, there is an optional cab available. The cab is fully enclosed and can be ordered with features such as air conditioning.
You get better protection from dust, weather, and noise compared to an open ROPS. Choosing between ROPS and cab depends on your climate, budget, and preference for comfort versus visibility.
Switching from ROPS to cab does not impact the tractor’s engine performance. The base layout and controls stay consistent, which makes it easy if you change operator stations in your fleet.
Both options have steps and sturdy handles for easier entry and exit.
Climate Control (A/C, Heater, Filter)
The cab on the AGCO LT85 can be equipped with a climate control system. Standard features include air conditioning and a heater, letting you work in comfort even during hot summers or cold winters.
The cab’s ventilation is designed to keep fresh air moving and reduce stuffiness. Cab air is filtered to limit dust, pollen, and other airborne irritants.
This helps you avoid discomfort during long operating days, especially in dry or dusty fields. You can adjust the system easily with controls located within arm’s reach, so you don’t need to stop working to manage the temperature.
The air conditioning system uses strong vents pointed toward the operator to cool the area quickly. The heater warms up rapidly on cold mornings.
If you have allergies or need to avoid debris, the filter system is a helpful addition. Open station models do not offer these climate controls, so you should choose the cab if temperature and air quality are concerns.
Seat & Suspension
The operator seat in the LT85 is designed for support during long shifts. The seat is adjustable to fit operators of different sizes, and it offers fore-and-aft movement.
Armrests are included on most cab units, providing better comfort and reducing fatigue. You can set the suspension to your weight, which cushions the ride across rough ground or while crossing tractor ruts.
The cab version may include a mechanical suspension seat—helping to smooth out vibrations and bumps. On ROPS models, the seat is still supportive but may not have as advanced suspension features.
Seat material is made for durability and easy cleaning after dirty tasks. You can tilt or adjust the steering column for a better fit, allowing for ergonomic posture during operation.
The design aims to reduce back and leg strain, even on long workdays in the field.
Noise Level (dB A @ operator ear)
Noise level can affect both comfort and hearing health during operation. The AGCO LT85 cab is built to lower the sound at your ear compared to open ROPS versions.
Cabs include insulation and sealed doors that muffle engine and transmission noise, reducing fatigue and the risk of hearing damage. Typical noise levels in an LT85 cab are usually between 75–80 dB(A) at the operator’s position.
On the open ROPS models, noise can exceed 85 dB(A), especially at higher engine RPMs. Prolonged exposure to levels above 85 dB(A) can be harmful, so an enclosed cab gives you a quieter environment.
If you operate long hours, selecting a cab with good sound insulation can help reduce the need for protective hearing gear. You may still want to use ear protection when running with doors or windows open or if your work involves higher than usual ambient noise.
| Feature | ROPS | Cab w/ A/C, Heater, Filter |
|---|---|---|
| Protection | Open, ROPS | Fully enclosed, ROPS + doors |
| Climate Control | None | Air conditioning, heater |
| Air Filtration | None | Yes, standard filter |
| Seat Type | Adjustable, basic suspension | Adjustable, upgraded suspension, armrests |
| Entry/Egress | Steps, handles | Steps, handles + doors |
| Noise Level (dB A @ ear) | 85+ dB(A) | 75–80 dB(A) |
| Comfort on Long Days | Moderate | High |
| Best Use Case | Good for clear weather | All weather conditions |
Hydraulics
AGCO LT85’s hydraulic system is built for reliable use on the farm. High lift capacity, strong pump flow, and a solid maximum pressure help you run modern implements efficiently.
| Feature | Details |
|---|---|
| System Type | Open-center |
| Implement Pump Flow | 39.7 L/min (10.5 gpm) |
| Steering Pump Flow | Single combined pump |
| Total Combined Flow | 39.7 L/min |
| System Pressure | 211 bar (3,060 psi) |
| Remote Valves (Number/Type) | 2-3, Double acting |
System Type (Open-Center / Closed-Center / PFC)
You get an open-center hydraulic system on the AGCO LT85. This means hydraulic fluid constantly flows through the pump and valves when the engine is running.
Open-center systems are simple and reliable for many field applications. Since flow is always circulating, this setup is quick to respond when you use the remote valves or lift implements.
There’s less complexity than in closed-center or pressure-flow-compensated (PFC) systems. Open-center is common in tractors of this size and power.
This type offers straightforward service and fewer components to fail. For daily work such as loader use or running basic attachments, the open-center system is well-suited.
Implement Pump Flow (L min⁻¹)
The implement pump provides a flow rate of 39.7 liters per minute (10.5 gallons per minute). This number shows how much oil can move through the system to cylinders or motors on your implements.
A flow of 39.7 l/min is enough for most implements used for hay, tillage, planting, or small loaders. Hydraulic motors or large-capacity cylinders will perform best within this range.
You should check your implement’s hydraulic requirements before connecting, especially for high-flow attachments. If you use older tools or ones that only need basic functions, this flow rate will meet your needs.
Steering Pump Flow (if separate)
The AGCO LT85 uses a single hydraulic pump for both implements and steering. This means no secondary or dedicated steering pump.
Oil for steering and implements comes from the same source. Under normal conditions, steering and implement demand can run together without problems.
If you run a high-flow attachment and steer at the same time, you may notice slight changes in steering effort. This setup is typical for this class of tractor and supports most field work.
If you do a lot of loader or heavy work while driving at low speeds, pay attention to combined demands from steering and the hydraulic system.
Total Combined Flow
With a single hydraulic circuit, the total combined pump flow matches the implement flow—which is 39.7 l/min (10.5 gpm). This is the maximum flow rate available for all hydraulic functions including steering and remote valves at once.
If multiple hydraulic functions are used at the same time, flow is shared between them. You may see slower cylinder movement if both remotes and steering are under heavy load.
Knowing your tractor’s total flow is useful when planning operations with several hydraulic needs.
System Pressure (bar / psi)
Maximum system pressure is 211 bar (3,060 psi). This high pressure means the hydraulic system can supply strong force to cylinders and motors without stalling or laboring.
Higher pressure allows you to lift heavy implements, operate larger cylinders, or use tools that need more hydraulic force. The AGCO LT85’s pressure is well-matched to its lift capacity and power output.
Always use hoses and fittings rated to withstand 3,060 psi to prevent leaks or failures.
Remote Valves (number & type)
Depending on specification, the AGCO LT85 comes with two or three double-acting remote valves. Double-acting remotes let you both push and pull a cylinder for full-action use with common attachments.
These valves are standard equipment for implements like loaders, mowers, or rakes. You connect hoses via quick couplers at the rear of the tractor.
If you need more than three hydraulic remotes, options may be available through your dealer. Two or three will cover most farm needs.
These remotes are compatible with most modern and legacy implements.
Three-Point Hitch (3PH)
The AGCO LT85 features a robust three-point hitch system designed for heavy-duty farm tasks. This setup lets you attach a wide range of implements, increase productivity, and easily control equipment in the field.
Hitch Category (1 / 1N / 2 / 3)
Your LT85 tractor is equipped with a Category 2 three-point hitch. Category 2 hitches are standard on medium to larger utility tractors.
These hitches fit implements with lift arm pin diameters of 1 inch and top link pin diameters of 1 inch. This standard allows you to use larger implements like heavier mowers, plows, planters, and cultivators.
Most modern implements for field work in row crops or hay operations will fit Category 2. You should check implement compatibility, but most agricultural equipment designed for tractors in the 70–120 hp range will match the Category 2 system.
Using a Category 2 hitch provides better stability and strength versus smaller categories. This reduces wear and increases the safe operating range for heavier equipment.
Simple adjustments to the lower arms and top link make hookup safe and convenient.
Lift Capacity @ Ball Ends
The three-point hitch on the AGCO LT85 can lift up to 7,815 pounds at 24 inches behind the ball ends. This high lift capacity covers most hay balers, plows, heavy rotary cutters, and even some small drills.
You should always refer to the weight of any implement you plan to use. Check that the total load, including attachments and added ballast, is within the 3PH lift rating to avoid stress or potential damage to the hitch or tractor.
Draft / Position Control
Your LT85 comes standard with both draft and position control functions for the three-point hitch. Position control allows you to set the height of implements accurately, so tillage and seeding tools maintain the right working depth across the field.
Draft control monitors the force on the lower hitch arms. This feature automatically adjusts the hitch height in response to soil conditions or obstacles that might push the implement upward or downward.
With draft control, plows and similar tools remain at a consistent depth, even in tough spots. You can fine-tune how sensitive the draft control is by adjusting the dial or lever in the cab.
For grading and non-soil engaging tools, position control is most useful because it offers precise height adjustments.
Top-Link Sensing (Yes/No)
The LT85 does not have electronic top-link sensing. Instead, it uses traditional mechanical controls for draft and position adjustments.
This means that all feedback for the hitch comes from the lower arms. Mechanical sensing means fewer complex electronics to maintain or repair.
For most row crop and general tractor work, you get solid performance and predictable operation.
AGCO LT85 3PH Specifications
| Feature | Details |
|---|---|
| Hitch Category | Category 2 (1-inch pins) |
| Lift Capacity @ Ball Ends | 7,815 lbs @ 24″ behind ball ends |
| Draft Control | Yes, mechanical |
| Position Control | Yes |
| Top-Link Sensing | No (mechanical lower link sensing only) |
| Typical Implements | Medium plows, mowers, planters, balers |
| Adjustment | Manual lever/dial settings for draft/position |
| Best Use Cases | Row crops, hay, tillage, light construction |
Axles & Load Limits
The AGCO LT85 tractor is designed for strong lifting power and reliable support during heavy work. Its axles and load limits affect what implements you can use and how safely you can operate the machine under tough conditions.
| Feature | Specification / Detail |
|---|---|
| Maximum Front-Axle Load | Engineered for stability during loader operation |
| Maximum Rear-Axle Load | High rear lift capacity, ideal for heavy implements |
| Final-Drive Type | Durable, standard planetary gear design |
Maximum Front-Axle Load (kg)
The front axle on the AGCO LT85 is built to handle loader attachments and tough front-end work. It is engineered to keep the tractor stable, even when heavy implements or ballast are added to the front.
Depending on the tires and loader setup, the maximum front-axle load typically exceeds 2,500 kg. When you carry or lift heavy front attachments, it is important to stay within the recommended front-axle weight to prevent mechanical damage or reduced steering control.
Always consider the combined weight of the front loader, any added implements, and counterweights. This helps you avoid overstressing the front axle and increases the overall safety and working life of the tractor.
Verify tire pressure and axle condition regularly before use.
Maximum Rear-Axle Load (kg)
The rear axle is where much of the tractor’s load-carrying ability is focused. For the AGCO LT85, the rear 3-point hitch has a lift capacity of up to 5,733 kg with the optional lift system.
This allows you to work with heavy implements such as plows, mowers, or balers. Rear-axle load limits are crucial when using large implements or attaching heavy trailers.
Exceeding these limits can lead to axle wear or even failures, so balance your loads evenly. Secure any attachments properly and avoid sudden high-impact movements that could spike axle pressure.
Pay attention to the total load, including the implement and any rear ballast, to stay within safe operating parameters. Regular inspections help identify signs of rear-axle stress, such as oil leaks or abnormal noises.
Final-Drive Type
The AGCO LT85 uses a planetary final-drive system. This type is well-known for its strength, durability, and smooth power delivery to the wheels, especially under heavy loads and rough ground.
Planetary gears distribute torque evenly, reducing strain on single components. With this setup, you get better traction and less risk of axle damage during demanding fieldwork.
Maintenance requirements are straightforward—check the oil levels, watch for leaks, and monitor for unusual wear sounds. The planetary design spreads the mechanical load, allowing for higher overall weight capacities and extended axle service life.
Tires & Track Options
Proper tires can help you get maximum grip, stability, and safety from the AGCO LT85, especially with its 94-hp output. Choosing between Ag, turf, or industrial treads can make a big difference in how you work, the wear on your land, and how well the tractor handles different surfaces.
Standard Front Tire Size (Ag / Turf / Industrial)
The AGCO LT85 usually comes with front tire options to match your main type of work. Most AG tractors of this size use 9.5×24 Ag tires as standard.
These are best for wet fields or where traction matters most, with deep lugs that dig into the soil. If you work mostly on grass, turf tires such as 10.5/80-18 are available.
These have a softer tread pattern that won’t tear up lawns or golf courses. Industrial front tires, such as the 12.5/80-18 size, often come with heavier sidewalls and a block tread.
These work well on harder ground or when you use the loader often. Check your job tasks to match tread and size to your goals.
Each size keeps the front axle safe and the steering responsive, especially under full load.
Standard Rear Tire Size
For the rear, the AGCO LT85 is equipped with standard 16.9×30 Ag tires. These rear Ag tires give you a solid footprint for putting power to the ground, which helps when pulling heavy implements or working on slopes.
Rear turf tires like 18.4-26 match well with the front options if you need to avoid soil compaction. Industrial tire options include 16.9×28 or similar, built for long wear and good stability on roads, gravel, or hard surfaces.
Some users may mix-and-match tires, but it’s best to pair Ag with Ag, turf with turf, and so on to avoid uneven wear and protect your drivetrain. Make sure inflation matches your tractor’s manual for best results.
Optional Duals / Tracks / Flotation Kits
The AGCO LT85 can be upgraded for extreme conditions. Dual rear wheels can be added if you need more grip or less compaction in soft fields.
These help spread the tractor’s weight more evenly. For even lower ground pressure, especially in very wet or sandy soils, you can fit flotation kits.
These use wider tires to carry the tractor over soft ground. Rubber tracks are not a common option for the LT85 due to its size and axle setup.
If tracking is a must, you might look for aftermarket kits or consider a different model. Most users will find that duals or flotation tires are enough for muddy or sensitive ground.
Always check your axle and fender clearance before changing to a bigger or wider tire option.
| Option | Front Tire Size | Rear Tire Size | Tread Types | Best For | Notes |
|---|---|---|---|---|---|
| Standard Ag Tires | 9.5×24 | 16.9×30 | Deep Lug | Field/plow, maximum traction | High traction, more soil impact |
| Turf Tires | 10.5/80-18 | 18.4-26 | Flat, ribbed | Grass/turf, minimal compaction | Gentle on turf, less grip in mud |
| Industrial Tires | 12.5/80-18 | 16.9×28 | Block, heavy side | Loader work, hard surfaces | Tough tread, handles easy on pavement |
| Dual Rear Tires | — | Dual 16.9×30 | Matches existing | Wet fields, heavy draft work | Spreads weight, reduces compaction |
| Flotation Kits | Varies, usually wider | Varies, usually wider | Wide, soft | Marshy or sandy soil | Low compaction, costly upgrade |
| Rubber Tracks (aftermarket) | Not standard | Not standard | Track | Extreme conditions | Rare, may void warranty, check compatibility |
Dimensions & Weight
You get the full picture of how the AGCO LT85 Tractor fits your needs by looking at its size and weight. These details affect how it moves, where you can use it, and how much it can handle.
| Specification | Value |
|---|---|
| Wheelbase | 96 inches (243 cm) |
| Overall Length | ~155 inches (estimate) |
| Overall Width (Min Tread) | ~74 inches (estimate) |
| Height to ROPS / Cab | ~101 inches (estimate) |
| Ground Clearance | ~19 inches (estimate) |
| Shipping Weight | 8,450 lbs (3,833 kg) |
| Operating Weight (with fluids) | ~9,000 lbs (estimate) |
Wheelbase
The wheelbase on your AGCO LT85 is set at 96 inches (243 cm). This length is the space between the front and rear axles.
A longer wheelbase like this helps make the tractor more stable, especially when pulling heavy loads or attachments. Stability is key if you plan to use large implements or work on uneven ground.
A 96-inch wheelbase also offers a smoother ride because it spreads the tractor’s weight better. This can help reduce ground pressure, which may protect soil structure when you farm.
When working in tighter spaces or around obstacles, keep in mind that a longer wheelbase can make the turning radius larger. You may need more space to turn in fields or barns.
Because the wheelbase is nearly eight feet, you have extra steadiness for loader work and when going over bumps.
Overall Length
The overall length of the AGCO LT85 is about 155 inches, though exact measurements may change with attached implements. For most uses, a length of just under 13 feet is normal for tractors this size.
Pay close attention to length if you are storing your tractor in a barn or shed. The extra length helps to balance heavy front loaders or three-point hitch implements.
A longer body gives you better weight distribution. If you add attachments, this balance makes lifting and pulling more stable.
You should measure your path widths and storage areas so you know the tractor will fit. The length can also affect transport options if you plan to trailer your tractor to field sites.
Overall Width (Minimum Tread)
The minimum tread width of the AGCO LT85 is about 74 inches, but this can depend on the tires and how the axle is set. Tread width is the distance from the centerline of one rear tire to the centerline of the other.
A width around 6 feet gives you a firm stance without being too bulky for many row crops. This helps keep the tractor steady, especially when lifting loads or traveling on slopes.
When setting up the wheels, a wider tread gives even more stability but may make the tractor harder to fit down narrow field rows or gates. You can often adjust the rear wheels to change this width to suit your field sizes.
Check the spacing before driving between orchard trees or inside farm buildings. The minimum width ensures you have as much clearance as possible for tight areas without losing safety.
Height to ROPS / Cab
Height to the top of the ROPS (Roll-Over Protective Structure) or cab is about 101 inches (over 8 feet) for the AGCO LT85. This height keeps you safe by placing the protective rollover bar well above your head.
If your model has a cab, the height may be similar or slightly higher. Always check the exact measurement with your setup, including wheel size and tires.
Knowing this height is important for clearing barn doors or overhead obstacles like tree branches or power lines. If you drive on public roads, verify you will fit under bridges and wires.
The ROPS protects you from injury in case of a rollover. Never remove or lower it just to fit through lower spaces unless it’s designed to be folded for that situation.
Ground Clearance
Ground clearance is about 19 inches for the AGCO LT85. This is the distance from the ground to the lowest part of the tractor’s frame or axles.
Higher ground clearance means you can drive over rough fields, crop residue, or small obstacles without getting stuck or damaging the undercarriage. This clearance is enough for most farm jobs, including row-crop and hay fields.
If you plan to drive over uneven terrain or through tall grass, this amount of space is helpful. Be aware that extra clearance can make it harder to climb in and out of the cab, but you get more flexibility in off-road conditions.
Shipping Weight
The shipping weight of the AGCO LT85 is 8,450 lbs (3,833 kg). This is the weight of the tractor with all main components, but without added fluids like fuel and hydraulic oil.
Shipping weight matters for two key reasons. First, you need to know it if you are moving the tractor by trailer or truck.
Second, it affects the cost and safety of any transport, loading, or unloading. Keep in mind that attachments, additional options, and fluids will make the tractor heavier once you start using it.
Check the load rating of your trailer or transport vehicle before hauling the tractor.
Operating Weight (with fluids)
The operating weight is about 9,000 lbs when you add all the necessary fluids and basic equipment. This includes fuel, hydraulic oil, and coolant.
Operating weight gives you a true picture of how much pressure the tractor will put on your fields during use. Heavier tractors may cause more soil compaction but offer more stability with large implements.
Knowing the operating weight helps you match your tractor to trailers, scales, and field requirements. You also need to account for any added ballast, weights, or loaded tires, which can increase total weight even more.
Summary Table: AGCO LT85 Tractor Dimensions & Weight
| Feature | Value | Notes |
|---|---|---|
| Wheelbase | 96 in (243 cm) | Between front and rear axles |
| Overall Length | ~155 in | May vary with attachments |
| Overall Width (Min Tread) | ~74 in | Adjustable with rear axle setup |
| Height to ROPS / Cab | ~101 in | With factory tires, may be higher with cab |
| Ground Clearance | ~19 in | From ground to lowest point |
| Shipping Weight | 8,450 lbs (3,833 kg) | Without fluids or extra options |
| Operating Weight (with fluids) | ~9,000 lbs | With fuel, oil, coolant, no major attachments |
Fuel & Fluids
Proper fuel and fluid management is important to keep your AGCO LT85 running smoothly and performing at its best. Regular checks on these levels help prevent wear, overheating, and mechanical problems.
Fuel-Tank Capacity
The AGCO LT85 features a diesel fuel tank designed for long operation times in the field. The tank’s volume typically ranges from about 28 to 32 gallons (106–121 liters), enough for most day’s work without repeated refueling.
This size allows you to spend more time working and less time stopping for fuel. You should use clean, high-quality diesel that meets manufacturer recommendations to improve engine life and power.
It is important to avoid water or dirt in the fuel, as these can harm the engine. Changing or cleaning fuel filters at suggested intervals also helps maintain smooth engine performance.
ISO 5011-compliant filters, like those made by Fleetguard, can help keep your fuel supply clean. Proper filter maintenance will protect the fuel system from contamination and is recommended in tough operating conditions.
DEF-Tank Capacity (if applicable)
The AGCO LT85 does not use a Diesel Exhaust Fluid (DEF) system. This series of tractor models does not require DEF for exhaust emissions compliance, relying on other methods for emission control.
You do not need to worry about filling a DEF tank or handling extra fluid. Since there is no DEF system, you should focus your attention on routine engine maintenance and regular fluid checks.
Always confirm with your user manual in case there have been updated models that add DEF, as specifications may vary by region.
Engine Oil Capacity
The Cummins 4BT3.9T diesel engine in the AGCO LT85 needs a specific amount of oil to run well and keep its parts lubricated. The standard engine oil capacity is approximately 3.9 gallons (about 15 liters).
Changing oil at the intervals recommended in your manual will help prevent engine wear. Using the right grade of oil, such as one that meets the latest diesel rating standards, is important for protection and performance.
Checking oil with the dipstick before each use is a good habit to catch low levels or signs of contamination. Some oil filters on the LT85 also conform to ISO 5011, enhancing filtration.
Keeping up with filter changes is as crucial as the oil itself in maintaining peak engine condition.
Hydraulic/Transmission Oil Capacity
The combined hydraulic and transmission oil system of the AGCO LT85 is made for heavy-duty use. Its oil capacity is approximately 13 to 15 gallons (about 50–57 liters), though this can change slightly by transmission type and specific model.
Using only the recommended hydraulic and transmission fluid helps with smooth gear shifts and responsive hydraulics. The fluid should meet AGCO or equivalent quality standards for lubrication and wear protection.
Checking and topping off the fluid level on a level surface ensures correct readings. Changing hydraulic oil and filters at regular intervals protects the system from damage caused by dirt or metal shavings.
Fleetguard and similar brands offer filters that meet ISO 5011 for maximum cleanliness in hydraulic systems.
| Feature | Capacity/Details | Notes |
|---|---|---|
| Fuel-Tank Capacity | 28–32 gallons (106–121 liters) | Use clean, high-quality diesel. Routine filter maintenance is important. |
| DEF-Tank Capacity | Not required | No DEF system present. Double-check manual for updates. |
| Engine Oil Capacity | 3.9 gallons (15 liters) | Use recommended oil. Keep up with ISO 5011-grade filters. |
| Hydraulic/Transmission Oil | 13–15 gallons (50–57 liters) | Use only AGCO-recommended fluid. Regular filter change suggested. |
Electrical System
The AGCO LT85 tractor uses a modern electrical system designed for reliability and easy maintenance. Every main component, from the ground type to charging output, serves a clear purpose in keeping your tractor powered during long working hours.
| Feature | Details |
|---|---|
| Ground Type | Negative |
| Alternator | 12V, 120A Iskra/MAHLE Alternator |
| Charging Output | 120 Amps |
| Battery Voltage | 12 Volts |
| Battery CCA Rating | 850-1000 CCA (varies by battery type) |
Ground Type (Negative / Positive)
The AGCO LT85 uses a negative ground electrical system. This means the negative terminal of the battery is attached to the chassis or body of the tractor.
A negative ground setup is common and simplifies maintenance. When you connect accessories or troubleshoot electrical faults, it is easier because the metal frame acts as part of the circuit.
You should always double-check the ground type before replacing or servicing any part of the tractor’s electrical system. Using the wrong ground polarity can damage sensitive components.
Alternator / Charging System
Your tractor is equipped with a 12-volt, 120-amp alternator. The alternator is typically a genuine Iskra, Letrika, or MAHLE unit.
These brands are reliable and durable. This alternator keeps your battery charged while powering all electrical systems, including lights, controls, and other accessories.
It uses an internal regulator, which helps control voltage output to stay steady even if engine speed changes. An alternator with a higher amp rating, like this model, helps when you use extra lights, radios, or powered equipment.
If you replace the alternator, be sure it meets or exceeds the 120-amp specification.
Charging Output (Amps)
The AGCO LT85 produces up to 120 amps charging output from its alternator. A high charging output is important if you use attachments that draw a lot of power, especially in cold weather or low-light work.
It also helps the battery recharge faster after starting the tractor. You can check if your alternator is charging at full capacity with a multimeter or an in-cab charging indicator.
If you notice dimming lights or slow starts, you may need to inspect the alternator for faults or worn wiring.
Battery Voltage
The electrical system in the AGCO LT85 runs on a 12-volt battery. Most modern tractors use 12 volts for compatibility with a wide range of accessories, tools, and diagnostic equipment.
A 12-volt system is safer and allows you to connect standard chargers, inverters, and other devices with ease. You should check your battery’s voltage often, especially in cold weather.
If the voltage drops below 12 volts when off or below 13.5 volts while running, the battery may be weak or the charging system could need service.
Battery CCA Rating
The recommended Cold Cranking Amps (CCA) rating for the AGCO LT85 battery is usually between 850 and 1000 CCA. CCA refers to the battery’s ability to supply enough current to start the engine in cold temperatures.
A rating in this range provides reliable starts, even on frosty mornings. When replacing your battery, always use one with equal or greater CCA.
Check the owner’s manual or the battery label for the exact rating. Batteries with lower CCA can result in hard starts or failure during cold weather.
Replace old batteries promptly to avoid work delays.
Total Cost Of Ownership Metrics
When you own an AGCO LT85 tractor (94 hp), understanding typical costs is important for budgeting. Key factors include service intervals, yearly maintenance, depreciation, and fuel use.
| Metric | Details |
|---|---|
| Service Intervals | Oil: 250 hrs, Filters: 250-500 hrs |
| Annual Maintenance Cost | $1,200–$2,000 (parts, labor, fluids) |
| Depreciation (1st/5th Year) | 12%/6% |
| Fuel Consumption (Rated Load) | ~11–13 L/hr |
Recommended Service Intervals
Routine maintenance helps your AGCO LT85 last longer and lowers the risk of breakdowns. The standard oil change interval is every 250 engine hours.
Air, fuel, and hydraulic filters are also checked or replaced every 250 to 500 hours, depending on use and conditions. Coolant and hydraulic oils need to be flushed roughly every 1,000 hours.
You should follow the owner’s manual for exact intervals. Greasing points should be serviced at least every 50 hours, especially if the tractor is working in dusty or heavy conditions.
Estimated Annual Maintenance Cost
The yearly maintenance cost of your AGCO LT85 depends on hours used, climate, and job type. On average, expect to spend between $1,200 and $2,000 per year, including scheduled replacements and labor.
Key costs include oil and filters, belts, hoses, seals, regular wear items, and minor repairs. Budget extra if you need dealer support or have older equipment, since costs rise as tractors age and more parts need replacement.
Most owners can keep costs lower by doing oil changes and other simple tasks themselves. More complex repairs will raise the total cost.
Depreciation Curve (% per year)
A new AGCO LT85 typically loses value fastest in the first few years. In the first year, depreciation is close to 12%.
By the fifth year, the yearly rate drops to around 6% as long as the tractor is well maintained.
Typical Depreciation Example:
| Year of Ownership | % Value Lost That Year | Estimated Value Retained |
|---|---|---|
| 1 | 12% | 88% |
| 2 | 8% | 80% |
| 3 | 7% | 73% |
| 4 | 6% | 67% |
| 5 | 6% | 61% |
Rough use, skipped maintenance, or high engine hours can increase depreciation.
Fuel Consumption @ Rated Load (L hr⁻¹)
At full power, the AGCO LT85 consumes about 11 to 13 liters of diesel per hour. Your actual fuel use depends on job type, load, and field conditions.
Light work, like mowing or transport, may use less fuel per hour. Tillage or heavy loader work will push fuel use to the high end of this range.
Using clean filters and proper tire pressures helps fuel efficiency. Keeping the engine tuned and working at the right RPM also keeps operating costs lower.